BIO 1000, 400, 500 Tap Service Instructions
Bio 1000, 400, 500
Tap Service Instructions
- Empty and disassemble bench top unit, remove internal filter components.
- Locate nut on the inside of glass at the end of tap shaft and unscrew anti-clockwise to remove.
- Remove magnets and internal white rubber o'ring.
- Careully extract tap outlet from glass reservoir
- Follow below video to service tap
- Reassemble making sure rubber o'rings are on inside and outside against glass, magnets on inside after the o'ring and pushing away from each other
- Hand tighten nut to create seal between glass and o'rings